Saturday, 29 June 2013

Salts - preparing soluble salts

There are 4 methods of preparing soluble salts:
  1. Acid + metal (MAZIT metals) ---> salt + hydrogen
  2. Acid + carbonate                      ---> salt + carbon dioxide + water
  3. Acid + alkali (soluble base)      ---> salt + water
  4. Acid + base metal (insoluble base)  ---> salt + water

Preparing Soluble Salt using Acid + metal (MAZIT metals) ---> salt + hydrogen

Steps:      dissolve >> stir >>  filter >> evaporate >> crystallize
 
In the reaction, hydrogen ions from the acid gain electrons from the metal atoms to form hydrogen gas.
                2H+                          +            2e-                         -->       H2 (g)
hydrogen ions(from acid) + electrons (from metal) --> hydrogen gas

Metals more reactive than hydrogen will reacts with acid to form a salt and hydrogen gas.



Reactivity Series of Metals
 
Most metals react with a dilute acid to form a salt and hydrogen gas.
However, this method is not suitable for
  • calcium and alkali metals (elements of Group I in the periodic table) because they react violently with acid. (Alkali metals react violently with water, halogens, and acids)
  • lead because it reacts too slowly with acid.
  • copper, silver and gold because they do not react at all with acids.
This method is used with less reactive metals - the MAZIT metals.
Magnesium
Aluminium
Zinc
Iron
Tin

Most commonly used dilute acid are:
dilute hydrochloric acid
dilute nitric acid and
dilute sulphuric acid

Salt produced are:
metal chloride
metal nitrate
metal sulphate (sulfate)

Examples of Metal + Acid (dilute)  Chemical equations:

Magnesium + Hydrochloric acid   --> Magnesium chloride + Hydrogen
    Mg (s)    +        2HCl (aq)          -->         MgCl2 (aq)           +     H2 (g)
 
Magnesium +   Sulfuric acid   -->   Magnesium sulphate (sulfate)  + Hydrogen 
   Mg (s)      +     H2SO4  (aq)  -->       MgSO(aq)          +      H2 (g)

Magnesium +    Nitric acid      -->    Magnesium nitrate + Hydrogen  
   Mg (s)      +     2HNO(aq)     -->       Mg(NO3)2 (aq)    +   H2  (g)

Zinc      +   Sulphuric acid   -->   Zinc sulphate (sulfate)  +  Hydrogen
  Zn (s)  +      H2SO4 (aq)     -->    ZnSO4 (aq)   +     H2 (g)  

Aluminium + Hydrochloric acid  -->  Alumiuim chloride + Hydrogen
    2Al (s)     +      6HCl (aq)         -->     2AlCl3 (aq)            +     3H2 (g)  

Iron     + Hyddrochloric acid    --> Iron (II) chloride  +  Hydrogen
  Fe(s)  +         2HCl (aq)           -->        FeCl(aq)                  +     H2 (g)  

Tin     +  Hydrochloric acid     -->  Tin (II) chloride   + Hydrogen
 Sn(s) +         2HCl (aq)           -->        SnCl2 (aq)         +     H2 (g)  

 
Magnesium chloride often used as anti-icing on the roads in winter, nutritional supplement, also as coagulant in the preparation of tofu from soy milk, storage for hydrogen and so-on.
 
 

Magnesium sulphate often used to as bath salt, agricultural nutrient, making tofu and so-on.
 
 

Preparing Soluble Magnesium Chloride salt 

Steps:      dissolve >> stir >>  filter >> evaporate >> crystallize
 
dissolve
Pour some dilute hydrochloric acid into a test tube or beaker.
Add a small amount of magnesium ribbon to dilute hydrochloric acid solution

stir
Keep adding the magnesium ribbon and stir it until it is in excess( Excess magnesium is added to ensure dilute hydrochloric is fully reacted).

Observation: effervescence due to production of hydrogen gas.
 


magnesium strap in
hydrochloric acid















Test: lighted splinter explored with a 'pop' sound, it's hydrogen gas.

 


 


filter
Remove the excess(residue) metal by filtration.



evaporate
Evaporate slowly the solution (filtrate) till crystallisation point or saturated.



Test for saturation: dip a cold stirring rod into the hot concentrated solution. If the solution is ready to crystallize, salt crystals would form at the end of the stirring rod).

Saturation  meaning: solution that contains as much solute as can be dissolved at a particular temperature.

If the salt solution is evaporated in high heat, only powder would form.

crystallize
Leave the saturated solution to cool and crystallize at room temperature.
Dry the crystals on a piece of filter paper or tissue paper.

 Summary of  Preparing Insoluble Salt
Steps:      dissolve >> stir >>  filter >> evaporate >> crystallize
 

 Common IGSE questions:

  1. Reason for using excess metal -  to ensure metal is fully reacted with acid, so that all acid is used up of neutralised.
  2. How the excess metal oxide can be removed from the solution -  by filtration.
  3. What is meant by the term saturated solution - no more solid/solute can dissolved at a particular temperature.
  4. What practical method could show the solution to be saturated - by dipping a stirring/glass rod into the solution, solution crystals would form along the rod or crystals on the edge of the solution may be observed.
  5. Why are crystals dried using filter paper instead of by heating - to prevent breakdown of the crystals. Heating cause water lost too quickly breaking down the crystals and become powder.  

   

Wednesday, 15 May 2013

atomic structure






What is an atom

An atom is the smallest component of an element having the chemical properties of the element. 


Basic Structure of an Atom

Basic Structure of an Atom 
  • An atom has a nucleus at the centre containing neutrons and protons with one or more electrons  circulating around the nucleus in electron shells or at different energy levels.
  • Protons are positively charged. 
  • Neutrons have no charge. 
  • Electrons are negatively charged.
  • The electrons are held by an electrostatic force of attraction by its negative charge and positive charge of protons.
  • An atom is electrically neutral because the same proton number (positive charge) in the nucleus is  balanced by the electron number (negative charge) in the shells.

How to identify atoms of different elements

  • Proton number also called atomic number.
  • The atomic number (proton number) determines the identity of an element. 
  • Each element has different proton number and no two different elements have the same proton number.
  • For examples, hydrogen has one proton number, carbon has six proton number and chlorine has seventeen proton number (see image below).


Hydrogen  has one (proton number) atomic number


Carbon has six (proton number) atomic number


Chlorine has 17 (proton number) atomic number



  • In the Periodic Table, the elements are arranged in order of increasing atomic number.


Periodic Table



Relative charges and approximate relative masses of protons, neutrons and electrons

  • Since an atom is too light to be measured with a weighing scale, relative atomic mass (amu, symbol Ar ) is used. 
  • The relative atomic mass is the average mass of the atom of an element, relative to the mass of an atom of carbon-12. 
  • 1 amu = 1/12 the mass of a carbon-12 atom

      The relative mass of a carbon-12 atom = 12 ( 6 protons + 6 neutrons )

      The relative mass of a hydrogen atom = 1 ( 1 proton + 0 neutron )

            Meaning, the average mass of a hydrogen atom is 1/12 of the mass of a carbon-12 atom.

      The relative mass of a magnesium atom = 24 (12 protons + 12 neutrons)

            Meaning, the average mass of a magnesium atom is twice the mass of a carbon-12 atom.
  • Infact, the relative mass of an atom are the total number of protons and neutrons in the nucleus. 
  • Electrons are omitted because their mass is so tiny. 
  • A proton and a neutron weighted almost the same with a relative mass of 1 but an electron weights only 1/1837 of a proton.


Sub-atomic 
Particle
Relative Mass
Relative Charge
Symbol
Proton

  1 amu
+1
p
Neutron

  1 amu
0
n
Electron
1/1837  amu
-1
e-




  • Protons and neutrons are in the nucleus of the atom, so they are called nucleons.                                           Nucleon number (mass number/ atomic mass) =  protons + neutrons


  • The proton number and nucleon number of an element are often expressed in a short way as the following:

                              

            Example 1:  A hydrogen element
An atomic structure of hydrogen element                  Hydrogen element written on a short way


     Example 2:  A helium element


List of the atoms of the first 20 elements in the Periodic Table, arranged in order of increasing atomic number.



Element
Symbol
   Atomic number    (Protons)          
        Electrons
    Neutrons
Nucleon number (protons+neutrons)
hydrogen
H
1
1
0
1
helium
He
2
2
2
4
lithium
Li
3
3
4
7
beryllium
Be
4
4
5
9
boron
B
5
5
6
11
carbon
C
6
6
6
12
nitrogen
N
7
7
7
14
oxygen
O
8
8
8
16
fluorine
F
9
9
10
19
neon
Ne
10
10
10
20
sodium
Na
11
11
12
23
magnesium
Mg
12
12
12
24
aluminium
Al
13
13
14
27
silicon
Si
14
14
14
28
phosphorus
P
15
15
16
31
sulphur
S
16
16
16
32
chlorine
Cl
17
17
18
35
argon
Ar
18
18
22
40
potassium
K
19
19
20
39
calcium
Ca
20
20
20
40

Electron Configuration/ Electron Structure 

Electrons move very fast circulating the nucleus. Electrons can only occupy certain energy levels (shells) and cannot exist between different levels (shells) at the same time. Each energy levels (shells) can hold only up to a certain number of electrons.


Chlorine atom, electron configuration: 2,8,7
First shell, the closest to the nucleus, has the lowest energy level, holds up to 2 electrons.
Second shell, has higher energy level, holds up to 8 electrons.
Third shell can also holds up to 8 electrons.
The further a shell is from the nucleus, the higher the energy level.

Electron configuration means the arrangement of electrons in an atoms.


For any atom, the electrons fill the energy levels starting from the lowest energy (innermost shell). When the first shell is full with two electrons, the remaining electrons start filling the second energy level (second shell) up to a maximum of 8 electrons. Then, electrons continue filling the third energy level and so-on. As the picture shown above, chlorine atom contains 17 electrons. 2 of its electrons fill the first shell, then the next 8 electrons fill the second shell and the remainder seven electrons fill the third shell. The electron configuration for chlorine can be written  as 2,8,7



Electron Configuration/ Electronic Structure (first 20 atoms)

Electron Configuration and The Periodic Table


The horizontal raw defined as Period. Atoms of the same Period have the same number of shells.


  • All atoms of Period 1 have one shell
  • All atoms of Period 2 has two shells and so-on. 
The vertical column defined as Group. Atoms of the same Group have the same number of valency electrons (the same number of electrons in the outermost shell or the last shell).

  • All atoms of Group 1 have one valency electron (one electron in the outermost shell or the last shell).
  • All atoms of Group 2 have two valency electrons (two electrons in the outermost shell or the last shell).


Define Isotopes

  • Isotopes are atoms of the same element with the same proton number but different neutron number 
         or
  • The atoms of the same elements with different nucleon numbers or mass numbers due to different neutron number.

     Isotopes of Hydrogen:

Hydrogen
Atomic Mass 1
1 proton, 0 neutron, 1 electron

Tritium, an isotope of Hydrogen
Atomic Mass 2
1 proton, 1 neutron, 1 electron
Deuterium, an isotope of Hydrogen
Atomic Mass 3
1 proton, 2 neutrons, 1 electron

     Isotopes of Carbon:







Isotopes: Identical Chemical Properties

Isotopes of the same element have identical chemical properties. This is because isotopes of the same element have the same electron distribution. In other words, they have the same proton number and same number of electrons.

There are two types of isotopes.
  1. Stable isotopes
  2. Unstable isotopes which is called radioisotopes 
  • unstable isotopes due to extra neutrons in the nuclei which are radioactive.
  • examples: cobalt-60 used in radiotherapy treatment and uranium-235 used as a source of nuclear power.

Use of Radioisotopes in Industry  (Note: Not carbon dating)

  1. Detection of leaks 
  2. Monitor of thickness of paper production
  3. Nuclear fuel for generating electricity
  4. Radiographs of welds
  5. Measuring wear
  6. Sterilising  food (food preservation)

Use of Radioisotopes in Medical Practice

  1. Medical treatment of cancer 
  2. Radiotherapy
  3. Treatment of thyroid gland
  4. X rays
  5. Tracer studies in body
  6. Sterilising equipment
  7. Locating tumours
For revision: Atomic Structure - IGCSE past year questions, paper 1